Focustronic Dosetronic PRE-ORDER

Pre order- delivery first quarter of 2019
Preliminary data concerning coming Dosetronic (Information can be subjects to changing) Basic infoDimensions: Same footprint as the Alkatronic, thus its possible to stack the units, and Dosetronic will be around the half height of an Alkatronic.Connections: Customizable to have the 10 luer connections on either sideCommunication with Alkatronic: WirelessControlled by: Wifi based app, and cloud.Pumps: 5, stepper basedAccuracy: 0.05 mlResolution: 0.1mlStandalone: yes Basic features Autotuning All Dosetronic can from start communicate with an Alkatronic, but also works perfectly as a standalone Dosing station without the Alkatronic. The communicating with Alkatronic though, opens up some features that make Dosetronic to something completely new for the market!  Every day it will summarize the dKH trend during that day (and sort out out-layers) and based on that fine-tune and autocorrect the basic scheduled dosing schema in Dosetronic, in those pumps you have in ”Alkatronic Mode”. This is something completely new for the hobby, and will make the Balling regim totally autoregulated! User friendly and intelligent When setting up the basic schedule you just enter number of dosing occasions and total dose, and DT do the whole schedule for you automatically with 5 min apart each dose. Of course you can after that manual adjust if you temporarily wants more from for instance the Ca channel, or dosing more at day than night etc. All channels can also be totally manual programmed, if you for instance wants to dose traces or something else in very small doses. Most user will use 3(-4) channels for the Balling regim, and you have 2 left for traces, carbon source, etc etc. These channels for other stuff than Balling, you set in Alkatronic mode OFF, and then you control those channels like you want, and those will not respond on dosing actions from Alkatronic, neither be included in the autocorrecting algoritms. Its also very easy and user-friendly to do an overall increasing/decreasing of the Balling doses, by just using an ”Overall Adjustment” button, which will change all doses in a matter of %, and thus keep all previous ratios between the channels and doses. No more struggling with manual change on all channels and doses. Actions if dKH measured by Alkatronic is outside you reference values: Alkatronic initiate as usual extra doses if dKH is below ”low ref value”, or block doses if dKH is above ”high ref value”. When Alkatronic is in ”Dosetronic Mode”, all those actions is transfered to the Dosetronic instead, and thus an extra dose caused by a low dKH, will now be performed in all channels in Dosetronic that are in ”Alkatronic Mode”. Same if dKH is too high, now dosing actions from Dosetronic will be blocked in all channels that are in Alkatronic mode, until dKH is back to correct values again. You do not have to remind anything of this. Alkatronic together with Dosetronic do all this for you, and all doses, included the so called extra doses, will always be perfect balanced, consisting of both KH/Ca/Mg/traces.
EAN does not apply
Brand alkatronic